|
Sunday, October 5th, 2008
Volvo Penta aq131c full inboard engine and leg
, new exchange manifold (£450), carb stripped and engine serviced, leg serviced with new UJ's hoses and recond prop (£500). Has been standing on trailer for 18 months in shetland 570 which is an unfinished project. Buyer to remove engine and hydraulic leg carefully.
Was in full working condition prior to start of project so should all be ok when electrics re connected.
If you want the boat and trailer as well it will be £2500
call alan View full advert
| Price: |
£1,200 |
Location: | Arborfield |
Date posted: |
5-Oct-2008 |
Friday, October 3rd, 2008
Thursday, October 2nd, 2008
 Do you have a PARSONS gearbox or MATHWAY steering
system in your classic boat, fishing boat or work boat, if so we can help with restoration, repairs, rebuilds, service or manufacture of new parts & complete units, Its all here at Parsons Mathway Marine.
NOW AT NEW PREMISES IN QUARLEY NEAR ANDOVER HANTS
www. parsonsmathwaymarine. co. uk View full advert
| Price: |
£0 |
Location: | Quarley |
Date posted: |
2-Oct-2008 |
Tuesday, September 23rd, 2008
 Restored Gardner 3LW: New pistons and rings;
ings;
reconditioned injector pump - to marine spec
reconditioned starter;
head skimmed;
block rebored;
waterways cleared;
valves ground;
new guides;
new gaskets all round;
tested under load.
automotive end plate View full advert
| Price: |
£6 |
Location: | Dungannon |
Date posted: |
23-Sep-2008 |
Wednesday, September 17th, 2008
Tuesday, September 16th, 2008
Monday, September 1st, 2008
 15hp Evinrude outboard for sale, mid 90's vintage
with a charging circuit. It is standard shaft, tiller control. It's pretty tatty but still has plenty of life in it.
This engine ran fine until the pull cord snapped a week ago, i have a bigger boat and this engine is not powerful enough for it is being sold as spares/repairs.
I had it serviced at the beginning of the season with new plugs and gearbox oil change. View full advert
| Price: |
£120 |
Location: | Dartmouth |
Date posted: |
1-Sep-2008 |
Wednesday, August 27th, 2008
Monday, August 25th, 2008
Saturday, August 23rd, 2008
Friday, August 22nd, 2008
|
**NEW** ECC New Conveyor Chains http://www
. ecc-ltd. co. uk/bc_conveyor. htm View full advert
Gardner 6LXB Generator, 80kva. Generator is new
new, engine has been overhauled. Perfect condition. View full advert
Gardner 4LW: New pistons and rings; reconditioned
ditioned injector pump
reconditioned starter;
heads skimmed;
blocks rebored;
waterways cleared;
valves ground;
new guides;
new gaskets all round;
tested under load: 35psi View full advert
New,Morse MT3 right hand single lever engine
control, boxed including manual and connectors, all unopened surplus to requirements. Retails at £ 150 - £ 170. Bargain, to include p&p. View full advert
Mercury 4hp 4 stroke engine short shaft 2003 only
done about 12 hours in excellent condition complete with external tank and line can be seen running. Runs like new. View full advert
suzuki df60/70 4 stroke power tilt and trim v. g
. c. with side plates and all the pins costs well over £1200 new View full advert
